Characteristics of PAA

Why Does My Produce Produce Mold? I have often been asked to look at a home for potential mold problems. One common denominator that seems to often follow a home with elevated “Mold Load” is their fruits and vegetables get moldy quickly. Here is the question of the day, Is the mold from the house, or was the produce inoculated prior to bringing the groceries in the house. It's a great question, and may be tough to answer. First of all, we know that fruit, and vegetables will occasionally have mold on them from the orchard or farm, to the processing plant, and finally to the retail store. I say “occasionally” because prevention is a high priority for the packaging plants. The general guideline is that if a store receiving manager feels there is more than 10 percent mold or bacteria, they often will reject the entire shipment. Additionally, About 20 percent of all fruits and vegetables harvested each year end up in the trash due to microbial spoilage, according to an April 2016 review published in Food Microbiology: Principles into Practice. Some are contaminated with bacteria or mold, while others go bad because of high temperatures, oxidation or increased humidity. Spoilage microorganisms can affect fresh produce anytime during harvesting, handling, distribution or storage. So, although these figures are concerning, we as consumers can't change them, and we can only prevent what we can prevent. So what about the food that gets moldy from our homes’ indoor environment? I have recently read an article that states that if you keep your apples in the refrigerator, they should stay good for about a week, if you leave them on the countertop, they should be good for about 7 days. All kidding aside, if you find you can't even get 5 to 7 days without the food getting moldy, you likely haveelevated mold load in the home. A few things you can do, as a homeowner, to keep your food from getting moldy. Wash or rinse your produce. According to Health.com, The reason to wash fresh fruits and veggies is to rinse away soil, microbes, and pesticides. Sometimes you'll see visible soil on leafy greens and other veggies, which can be unappetizing and add a gritty texture to your meal. Microbial pathogens found on produce, including E. coli, salmonella, the microbes that cause norovirus, and mold or fungus can result in foodborne illness. Dry the fruits and vegetables thoroughly. Moisture encourages mold growth. Keep an eye on spoilage dates printed on packages, including deli meats and cheeses. Refrigerate foods quickly when you bring them home. And finally, and maybe most importantly, get your home healthy. If you find your food is spoiling before it should, you likely have “elevated mold load” in your home. Elevated mold load includes spores, growing mold, dormant mold, and the mycotoxins associated with mold. Call Pure Maintenance and see if they can help. If your home grows mold on fruits and vegetables, meats and cheeses quickly, you can figure the indoor air quality isn’t doing your personal health any favors. Pure Maintenance is literally, “A Fresh Start to a Healthy Home” Mike Adams

More about Mold Load Mike Adams The term “mold load” has been an effective way of describing the mold burden that is in our homes. Not entirely different from high or low blood pressure, high or low cholesterol, or high or low electromagnetic radiation. It is safe to assume, and in my mind, very obvious, that some homes have a very high mold load, and some homes have a very average mold load. Have you ever asked yourself why some homes can have a leak, and the mold growth is very very minimal, and others, the mold thrives. These same homes in which the mold thrives, also seem to grow mold in the tub and shower area often, and the food on the counter or in the refrigerator gets moldy quickly. Its a variable that is not often discussed. The reason for the variability is the ever growing mold load in the home. It is safe to say that all homes have some mold, just as all air that we breathe indoors or outdoors has mold. However, the term mold load is beyond the scope of simply the number of spores that are in the air. Mold load includes spores in the air, growing mold on surfaces, dormant mold on surfaces and in the air, hyphae or hyphal fragments on surfaces or in the air, and the associated mycotoxins Keep in mind, you need at least one million spores within a square inch to be able to see any mold with the naked eye. So lets not assume that if we had an issue, we would see it. Additionally, mold does not die off like bacteria. It can change from sporing to growing, to dormancy etc etc, but it does not generally die-off. It is for this reason, the mold load of every home increases day by day, and year by year. It’s a concept that the traditional remediation world refuses to recognize, and for good reason. They simply do not have an answer for the mold load that is throughout the home. In fact, they double down on NOT recognizing this by “containing” with plastic, the area to be addressed. I understand that their reasoning is that they need to “contain the mold” so that it doesn't get into the rest of the home. This is a great thought, if for even a split second, anyone thought the rest of the home was sterile. Or, at very minimum, void of mold load. I'm guessing the only way to assign logic to the containment idea is to suggest that all mold, in the entire home, heard about the leak and decided, as a group, “lets go to the party” Of course, this is beyond ridiculous. I personally look at the containment protocol differently, and I believe it is their way of suggesting, “we are not responsible for anything in the home, relative to mold, except what is in this small contained area. I took a week long mold contractor class a few years ago, and we spent a day learning the ins and outs of 6 mil plastic, and duct tape, and double bagging, and twisty ties. I did not feel as though I was learning anything that would be considered “state of art”. Yes, it was a long day. In an attempt to break up the day, I asked the group, “hey, after we are done, we take down the plastic, and then test the home?” An almost thunderous amount of voices all said, almost in unison, “NO”! I went along, played dumb, and said, “why”? The vocal ones were very adamant in telling me, “you will never be able to pass that house, on a mold quality test, unless you leave the containment up, and test within containment after you have run air scrubbers within the containment for a few days. I pushed further, “so, are we not worried about the rest of the house”? The return statement was, “it's not within our scope of work”. I get that, and thats a safe way to keep themselves free of liability. I can draw a comparison to the car world. Lets say you are involved in a car accident. The reason for the accident is the brake system on the car failed. The accident caused significant damage to the front end of the car. What needs to go be corrected for this car to be working correctly again? Anybody with even a tiny amount of common sense would say, make sure you get the brakes fixed. But what if you just took the car to a body shop. And they just fixed the front of the car? In other words, they just fix the visible problem, and they ignore the root of the problem. This seems insane, however, in my mind, this is precisely what the containment/remediation world is doing to a home. Just as the brakes need to be fixed for the car to be safe, the mold load needs to be corrected to make the home healthy. In the majority of the homes that I have been involved with, the overall mold load was elevated long before the flood or leak occurred. Do some things possibly still need to be removed? Of course. However the point here is the whole home needs to be corrected. I once was involved in a very spirited conversation with a lab technician that told me the water caused the mold. And it does, sort of. However, In her mind, the water brought in the mold and the wet sheetrock simply begins to grow mold. I countered with, “please explain how a mold spore or cell will ride on the back of H2O, work its way through the foundation, and eventually into the studs and ultimately the paper on the sheetrock. THAT IS NOT WHAT IS HAPPENING. In fact, there are primitive water filters that almost work the same way. They first filter through a layer of soil, then through rocks, then through wood chips, and eventually you end up with relatively clean water. I point this out, as reasoning that the mold is not coming with the water. I was trying to point out that the mold spores are part of the already, pre existing mold load in the home. The water simply helped the mold load manifest itself. It is critical that people dealing with mold toxicity understand that the visible mold, wherever it is, is not the bulk of the problem. Just as the damaged front bumper is not the bulk of the problem with the car. When a home has a flood or a leak, the tendency is to look at the area of the water intrusion, which depending on the mold load of the home immediately before the leak or flood, will begin to grow mold in 24 hours. Pure Maintenance is the only Company that understands this concept, and has a way to address the entire home. Mike Adams

In this series of posts, I’ll be explaining how peracetic acid (PAA) kills or inactivates microbes. But first I need to set the stage. PAA is a highly reactive molecule. But to explain what the PAA is reacting with and why that matters, I first need to describe what microbes are made of. All living things (including microbes) are made up of a complex mix of chemicals. But we can place all of those chemicals into three broad groups: water, small molecules, and macromolecules.